How to Clean Juicer Filter Step-by-Step Instruction

The flavour of fruit juice made in a juicer is unrivalled by anything else. This might be done for nutritional purposes or simply because you like the flavour of the juice. Numerous benefits, such as enhanced immunity, more sustained energy, and a more positive disposition, result from the high concentration of micronutrients.

When all of a juicer’s components are in good working order, it performs very well. Therefore, cleaning is an integral part of regular gadget maintenance. Here You’ll find instructions on how to clean juicer filter. If you’re looking for advice on how to clean your device efficiently or remove stubborn stains, you’ve come to the right place.

Cleaning Your Juicer Is Crucial to Your Health

There are many reasons why people use the juicer at all hours of the day and night. Freshly squeezed juice is a great way to boost energy and enhance your health, thanks to the abundance of vitamins and minerals it contains. The health benefits of juicing are maximised when the juicer is kept clean.

How To Clean Juicer Filter

Although juicing can help digestion, the benefits may be diminished if the juicer’s screens or other parts are dirty. Even while most fruits and vegetables should be able to flow through a high-quality juicer, the pulp, rinds, and vegetable skins often end up in unexpected places. Even the tiniest bits of biological waste might wreak havoc on the system if they aren’t removed.

A Deep Cleansing for juice

Cleaning the filter or screen after buildup is difficult for many individuals. An integral part of any juice extractor, the filter ensures that your juice is pure and pulp-free every time. The juice goes through a filter that catches the pulp in a fine mesh during the juicing process.

A Deep Cleansing For Juice

Due to this, mesh screens rapidly become clogged, reducing the juicer’s efficiency and negatively impacting the juice’s flavour. When the filter in your juicer gets dirty, you can clean it in the ways described below.

Put a strong light through the screen of your juicer if you are unclear if it is clean. While it may look clean when placed on the juicer, you may be surprised to find a lot of material when held to the light. This frequently occurs because of the small openings of most juicers designed for juicing hard fruits and root vegetables.

The most common reason for screen blockage in juicers is the failure to wipe the screen promptly after use. If you wait too long to dispose of the pulp and juice residue, they can dry up and clog the tiny juicing pores. The cleanup is much easier before they dry.

The juicer’s components should be soaked in water until they’re ready to be used, even if you can’t get to them straight away. Most municipal water systems have trace amounts of minerals naturally or as an added flavouring. Mineral deposits in the sieve holes might build if you leave your juicer screen dry in the air.

If you want to avoid this, dry your juice screen thoroughly after wiping it with a towel. Suppose you reside in an area where the water has a high concentration of minerals. In that case, you should often clean the feeding tube and juicing chamber to prevent discolouration from mineral deposits.

How To Clean Juicer Filter

If the screen on your juicer becomes clogged, you may remove the buildup by soaking the appliance in a solution of water, vinegar, or citric acid for a few hours. In addition, you may buy a professional cleaner like Citroclean and mix it with water to utilise it. After soaking and scrubbing, rinse it with a cleaning brush or toothbrush.

That fresh look is essential. To save time and energy, you should clean your juicer frequently. Separating and cleaning up after each juice may be a pain. You may trust me when I say that it will work. You’ll also save time since you won’t have to clear off sticky residue and stubborn stains as often. If you clean your juicer regularly, you won’t have to give it a complete cleaning as regularly.

Once you’re ready to go, read the instructions below


Never attempt to clean a running electric juicer. Fires, injuries, and other catastrophes may happen from power surges and other problems caused by this. You should unplug any cables you aren’t currently utilising. When the stakes are this high, it’s okay to double-check.


Make sure your juicer is like the vast majority and has removable components. Follow the appliance’s instructions and take apart any pieces that can be disconnected to find out. If you take apart your juicer, you may clean all the crevices and tight spaces you may have overlooked earlier.


At the same time it was extracting juice, the machine sorted out the pulp and put it in its container. It’s high time that the pulp was all gone. If you want to get things done quickly and easily, use a spatula. The pulp might stick to the inside of the container if you aren’t cautious.

The spatula, your new best buddy, should be clean and ready to go at this time. To clean the container, rinse it with hot water and a dish soap drop or two. Getting good results requires careful attention to detail. If you find dirt or debris, you can’t get rid of, a thorough cleaning may be in order.


When you’ve finished washing the pulp container, you can go on to the next item on your laundry list. Providing specifics is essential. I suggest using dish soap, even if it’s a mild variety. Some parts might easily be scratched or broken if they are banged in the sink.

If you want everything to fit together smoothly, you must ensure you’ve thoroughly rinsed all the pieces. Nobody wants to gulp down juice that smells and tastes like bar soap. Put on gloves and wash your hands in lukewarm or warm water to get ready. Extra caution is needed while using mesh strainers. The possibility exists that some pulp was sucked in.


As a free extra, some vendors will toss in a dusting brush with your purchase. An alternative is to use a toothbrush if neither of those options is available. This now doubles as a brush for washing out your juicer.

If you need to clean an area that is difficult to access, a brush is your best choice. You can use your fingers, but you won’t be able to access everything.


Now is the time to pay special care to the juicer’s permanent parts. Remember that you can’t just rinse these components with water to clean them. The device’s motor, power cord, or other fragile components might be severely damaged if handled in such a way.

If you can, try to avoid abrasives and other similarly rough substances. This technique’s best results are achieved as it thoroughly cleans and doesn’t become as saturated as a sponge. It is essential to clean the whole foundation thoroughly. Gently wipe away dust and grime.


A drying rack close to the sink is a great way to conserve valuable square footage. It’s time to put everything back together again. You may also spread a towel on the kitchen counter and let air dry the items. There’s no need to dry it on a rack or towel, but that might also help dry the base.


Now that everything has dried fully, you can start putting everything back together. Please refer to the instructions provided if you need clarification on the proper placement of any of the included pieces. This way, you won’t risk destroying the whole structure by shoving a part into the wrong spot.

If you want to keep juicing later, you may easily do so by reassembling the necessary components. The entire cleaning procedure should take at most ten to fifteen minutes. As a result, the required time varies from one product to the next.

After you’re done juicing, starting a simple cleaning method is best for optimal outcomes. You won’t have to worry about a buildup of residue, and any accumulated filth may be scrubbed away. All you need to do is follow the steps above and utilise your juicer of choice. On the other hand, detailed instructions on cleaning your specific product can be found in its user manual.

How to Clean Juicer Filter

Cleaning Your Juicer Is Crucial To Your Health

What part of a juicer is the most troublesome to disinfect? You’re looking at the mesh screen or filter on your phone. However, the pulp-free integrity of your juice depends on cleaning it completely. The pulp the mesh filter is meant to collect and keep out of your juice might make it clogged easily.

For maximum results, clean the filter right after you’re done juicing. After the pulp has dried, it is very difficult, if not impossible, to remove it. Cleaning the filter as soon as possible allows you to complete the process with a paper towel.

Find out how to thoroughly clean your mesh filter by following these instructions.

  • Adding fresh lemon juice to hot water is a great way to start the day. Before usage, let the filter sit in the flavouring solution for a few minutes
  • Use a toothbrush to remove any residual pulp from the lemon water filter. This is necessary for thoroughly cleaning the mesh filter since the pulp cannot be reached in any other manner.
  • The lemon water will need to be filtered, and the pulp may be removed with a toothbrush. Rinsing the screen with warm water will also help eliminate the pulp. Ensure that all of the pulp is washed away by directing water through the pores in the screen.
  • They might try washing it with soap and water to get better results from the filter. As a precaution, wipe the screen clean after that.
  • The filter is crucial because it removes the pulp and ensures that the juice meets your requirements. All fruits produce pulp, so remember to keep your juicer’s screen clean at all times.

Tips for Keeping Your Juicer spotless

Tips For Keeping Your Juicer Spotless

Here are some tips for cleaning your juicer filter. There’s the option of letting a mixture of water and vinegar rest in the juicer for a while. Using a toothbrush to scrub those inaccessible areas is still another option. Finally, you may use a cleaning tablet that can be put in the dishwasher to eliminate any leftover residue.

Before attempting any of these methods, please check the manufacturer’s instructions. A professional appliance cleaner should be contacted if your Breville juicer needs to be properly cleaned after several attempts.


How Do You Clean a Juice Filter?

If your juicer screen gets clogged, immerse it for several hours in a combination of water and vinegar or citric acid to clear it out. A professional cleaner such as Citroclean can be purchased and used with water as an additional option. Wash it with a cleaning brush or toothbrush after soaking and scrubbing it

How Do You Clean a Juicer Buildup?

Try mixing one part water to one part vinegar with a squeeze of lemon juice to clean your juicer’s components if they’re covered in mineral wealth or scale from hard water. Soak it in the solution for at least an hour, if not many hours.


You may boost your health and always have a refreshing drink on hand with the help of a juicer. Dozens of recipes exist, so it should be easy to find something that suits your tastes.

You must treat your juicer with the attention it deserves during the entire procedure. You should clean it after each use and give it a good once-over every so often. After installation, special attention may be needed to plastic components, particularly mesh filters.

Although maintenance may need some time and effort on your part, keeping your juicer in tip-top shape will guarantee that it serves you well for as long as possible.